DIN RAIL Power Supply DR240W, Switching Power Supply, Switch Power Supply
Universal AC input / Full range
@Built-in active PFC function
@Protections: Short circuit/ Over load/ Over voltage / Over temp.
@Cooling by free air convection
@Can be installed on DIN rail TS-35/7.5 or 15
@LED indicator for power on
@100% full load burn-in test
@Fixed switching frequency at 100KHz
@3 years warranty
@Dimensions: 125.5*125.2*100mm (W*H*D)

Specification:
1) INPUT
@Voltage Range: 88-264VAC, 120-370VDC; 47-63Hz
@AC Current: 2.8A/115VAC 1.4A/230VAC
@Inrush Current: Cold start 27A/115V 45A/230V
@Leakage Current: <3.5mA/240VAC

2) PROTECTION
@Over Load: 105%-150%; Constant current limiting, recovers automatically after fault condition is removed.
@Over Voltage: 30-36V for 24W, 54-60V for 48W; Shut down o/p voltage, re-power on to recover.
@Over temp.: 100º C± 5º C(TSW1); Shut down o/p voltage, recovers automatically after temperature goes down.

3) ENVIRONMENT
@Working Temp. & Humidity: -10º C— 70º C; 20%~90% RH.
@Storage Temp. & Humidity: -20º C— 85º C; 10%~95% RH.
@Vibration: 10~500Hz, 2G 10min. /1 cycle, period for 60min, each along X, Y, Z axes.

4) SAFETY STANDARDS
@Withstand Voltage; I/P-O/P: 3KVAC; I/P-FG: 1.5KVAC; O/P-FG: 0.5KVAC
@Isolation Resistance: I/P-O/P, I/P-FG, O/P-FG: 100M¦¸/500VDC
@Safety Standards: Design refer to UL508, UL60950-1, TUV, EN60950-1
@EMC Standards: Design refer to EN55011, EN55022, EN61000-3-2, -3, EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2(EN50082-2)

5) OUTPUT
Type No | Output | Tol. | R&N | Effi.
DR-240-24 | 24V, 10A | ± 1% | 80mVp-p | 84%
DR-240-48 | 48V, 5A | ± 1% | 150mVp-p | 85%