The DC80...Is used for 2-position control with on/off output for the control the temperature by means of an NTC sensor placed externally or internally in the thermostat.
The thermostat acquires the actual temperature with its built-in sensor or floor sensor, and the heating contact will close when the room temperature falls below the selected setpoint.

Application
For the control of warm-water (floor) heating systems and direct electric heating systems used in Commercial buildings, Residential buildings, Light industrial buildings...

Features
7-day programmable function for energy-saving operation
On/off control output for heating device
Symbol indicator when heating is on
Mechanical switch key for power supply
Temperature limitation function for protecting the floor
7-day time maintenance in the event of a power failure
Large size LCD display for better readout
"Key-lock" function for protecting the setted parameters (especially suitable for Public places).

Technical data
Voltage: AC230V (AC110V / AC24V available)
Power consumption: 2W
Setting range: 5º C~50º C (factory setting: 5º C~35º C)
Limitation range: 4º C~99º C (factory setting: 28º C~32º C)
Switching differential: ± 0.5K
Ambient temperature: -5~50º C
Protective housing: IP20
Housing material: Self-extinguishing PC
Floor sensor: Rubber-thermoplastic NTC sensor,
Cable length is 3m