Pressure clamp connectors
Dynamic heating up
Wide voltage range
Temperature limiting
Energy saving
Clip fixing
Quick installation
These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes the heat evenly. The pressure clamp connectors save time and simplify installation...

Operating voltage 120-240V AC/DC* (min. 110V, max. 265V)
Heating element PTC resistor, self regulating and temperature limiting
Heater body extruded aluminium profile, anodised
Connection 3 pressure clamps for stranded wire 0.5-1.5mm2 (with wire end ferrule) and rigid wire 0.5- 2.5mm2
Connection casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 50022
Fitting position vertical
Operating/Storage temperature -45 to +70º C (-49 to +158º F)
Protection type/Protection class IP20 / I (earthed)
Approvals VDE + UL File No. E150057
Accessoires screw fixing, Art. No. 09024.0-00 (1 packing unit = 2 pieces)

*Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.

Art. No. Heating capacity* Inrush current max. Length (L) Weight (approx. )
15W 1.5A 65mm 0.30kg
30W 3.0A 65mm 0.30kg
45W 3.5A 65mm 0.30kg
60W 2.5A 140mm 0.40kg
75W 4.0A 140mm 0.50kg
100W 4.5A 140mm 0.50kg
150W 9.0A 220mm 0.70kg

*at 20º C (68º F) ambient temperature